Fleshlight GO Adapter Installation for Therabody Massager

Please read fully before operation! The above video is to show how the adapter connects to the Fleshlight. This is not a depiction of how best to use it with an attached Fleshlight. For detailed usage instructions please read below.

Due to the intensity of massage devices and the weight of a Fleshlight, we recommend using our Fleshlight adapters with the following steps. Resist the temptation to just turn on your massager with a free floating Fleshlight attached the second you get it. There is a chance of adapter failure if the Fleshlight is not properly supported, however by taking the proper precautions and with a little bit of preparation an amazing experience is in store.

To set the scene a little more, a Fleshlight is very heavy, therefore a lot of the vibrations will travel up into the massaging device itself, and thus into your hands. Therefore, we can’t recommend this as a hand-held device as it’s just too intense to hold, which increases the chance of a drop and breakage of the adapter. With that being said, we do recommend that your massage gun and Fleshlight be placed down on a soft, flat, parallel surface, in a supported fashion, and positioned appropriately before attempting to hit the power button.

The following are the steps you should take before usage:

Unscrew and remove the threaded piece from the back of your Fleshlight.

Gently thread on the Therafun adapter onto the end of your Fleshlight. Not too tight, but not loose.

With the Fleshlight supported in one hand, and the massager in the other, attach the adapter to your massage device. If using a Therabody brand device, set down the now connected devices on a flat surface and gently slide on the provided locking clip.

Keeping the Fleshlight and massager supported together as a unit in your hands, find an area that will provide equal support from below to both devices. Reducing unnecessary stressors on the hinge points during operation is important. For example, try placing a pillow underneath the massager and Fleshlight, or place your massager and Fleshlight near the edge of a bed or chair. The Fleshlight should not be hanging in mid air before turning it on. You should not simply angle up or prop up the Fleshlight, both the massager and Fleshlight should be on a near equal plane. In general, keep the devices parallel to the ground. We hope this makes sense!

Once the Theragun and Fleshlight are positioned nicely, perform a brief dry test to confirm that the positioning is good for the intense vibrations that are about to go down. To test it, turn the massager on and off again quickly to test that everything is secure, straight, and supported. It may even be advisable to confirm how to turn your massager on and off quickly before attaching any device, so that you’re familiar with your machine and how it operates (before things get crazy).

If satisfied with the positioning, strap in for a wild ride. Lube up, enter when ready and perform one more sensation test (optional) by again turning the device on and off for a split second to momentarily experience the sensation. Turn it on and off to your liking throughout your session.

As mentioned before, because of the combined weight of the Fleshlight and the massage device, it’s not recommended to be held in your hand, as the chance of dropping the two devices when activated are high. It’s best to allow the massager and Fleshlight to vibrate freely on a supported soft surface, such as on top of a pillow or a bed. You’ll understand what we mean when you try it! If you have any questions, don’t hesitate to reach out.